User manual

Setting Up

Unpacking

When unpacking, please check if all parts are included. If something should be incomplete, please

contact your local Manikin Dealer immediately.

The Memotron box contains:

• the Memotron

• power-cable

• this manual

• a CD-Rom packed with sounds

We recommend to keep the original box for further transportation – or better – purchase a suitable

road-case.

Installation

Place the Memotron on a clean, flat surface. Installation on a solid keyboard-stand is highly

recommended. The required space is 34,9” x 15,8”, weight approx. 20 lbs.

Connections

You require a mains outlet and a suitable audio-system or at least a headphone.

i The Memotron automatically adapts to your local power-system (110V – 240V AC)

 How to hook up the Memotron:

1. Make sure, that both the Memotron and your audio-system is powered OFF.

2. Connect the included power-cable to the Memotron’s ac socket and to a suitable power

outlet.

3. Connect the audio-output of the Memotron to the line-level inputs of your audio system. Use

shielded high quality ¼ inch mono jack cables. By connecting only the „LEFT“ socket of the

Memotron, it can be hooked up to a mono audio system.

4. If you wish to play other MIDI-equipped sound generators from the Memotron’s keyboard,

connect the MIDI-out of the Memotron to the MIDI-in of these sound generators resp. your

MIDI-system.

5. If you wish to play the Memotron via a suitable external MIDI-keyboard or –sequencer (e.g.

the Manikin Schrittmacher), please connect the MIDI-in of the Memotron to the MIDI-out of

this external MIDI-device. Make sure to use suitable MIDI-cables.

6. Power ON the Memotron and at least your audiosystem (!)

7. Proceed with chapter „Basic Operation“ on the next page.

Memotron User Manual