User manual

Save Tracks
(onto memory card)
This function is useful to draw up your sound library independently from a computer. Tracks can be
saved onto an inserted memory card. Please note that only sample data, not sound parameter and
effect settings, are saved as a track. Sound parameters and effect settings have to be saved within a
“frame”. Please refer to section “Save frames” on page 12. Before a track can be saved, it has to be
loaded into the Memotron's internal memory. Please refer to section “Load Tracks” on page 8.
The track to be saved has to be selected within the sound settings (A, B or C) and will be saved onto
the Flash-Card as soon as the Save-function is executed. When the Save-process is complete, the
display jumps back to the track settings.
! The realtime parameter controls on the panel such as HALF SPEED, TONE, PITCH,
VOLUME and A B C will not be stored.
! Please note that tracks in the Memotron’s internal memory will be lost, as soon as the
Memotron is powered down and therefore have to be saved on Compact-Flash-Card
previously!
Delete Tracks
(from memory card)
The ”Delete”-function is used to erase tracks on the inserted Flash-Card. If you just want to delete a
track from the Memotron's internal memory, please use the “Initialise Tracks” function, described on
page 10.
To delete a sound file from a memory card, please enter the track menu. By selection of “Delete
Track”, you are prompted into the current directory.
Now you can choose a track on the Flash-Card which will be erased. The Delete-function shows a
warning, before the process can be executed. To cancel the function, please select “No” at the
warning or press the ESC-button.
When deleting is done, the display jumps back to the track settings.
! The finished delete-process can not be made undone – please pay attention!
Memotron OS v1.3 User Manual 9