User manual

Frame Functions
Frames can be used to access complete setups that are made up of up to three tracks and their
corresponding parameter settings. The functions of the frame menu are "load", "save", "delete", and
"initialise".
A frame contains track names and links to their position on a CD-ROM or a memory card respectively,
not the sample data itself. This allows faster storage and saves lots of memory on the card. Please
bear in mind that it is vital to insert the CD-ROM or memory card that contains the tracks which are
needed to load a certain frame.
! The realtime parameter controls on the panel such as HALF SPEED, TONE, PITCH,
VOLUME and A B C will not be stored.
! Please note that tracks in the Memotron’s internal memory will be lost, as soon as the
Memotron is powered down and therefore have to be saved on Compact-Flash-Card
previously!
Loading Frames
To load a frame, the desired CD-ROM or memory card has to be inserted into the Memotron first. If
that has not been performed yet, please change the corresponding storage medium. Refer to section
"Change CD" respectively "Change Memory Card" on page 14.
Use the DATA-knob to browse through the menu levels until you reach the "Sound Settings" page.
Select "F:" and enter the frame menu. Click on "Load Frame" and open the file directory.
Choose between CD-ROM or memory card and select the desired frame. To cancel the loading
process and leave the directory, simply hit the ESC-button.
When pushing the DATA-knob, the selected frame will be loaded with all its settings. In case the
selected frame requires a track that is not to be found on the currently inserted storage medium, an
error message will pop up and the loading process will be aborted.
When the loading process has been completed successfully, the display will return to the sound
settings page.
Memotron OS v1.3 User Manual 11