User manual

Setting Up
Unpacking
When unpacking, please check if all parts are included. If something should be incomplete, please
contact your local Manikin Dealer immediately.
The Memotron box contains:
• the Memotron
• power cable
• this manual
• a CD-ROM packed with sounds
We recommend to keep the original box for further transportation – or better – purchase a suitable
road-case.
Installation
Place the Memotron on a clean, flat surface. Installation on a solid keyboard-stand is highly
recommended. The required space is 34,9” x 15,8”, weight approx. 20 lbs.
Connections
You require a mains outlet and a suitable audio system or at least a headphone.
i The Memotron automatically adapts to your local power system (110V – 240V AC)
☞ How to hook up the Memotron:
1. Make sure, that both the Memotron and your audio system are powered OFF.
2. Connect the included power cable to the Memotron’s AC socket and to a suitable power
outlet.
3. Connect the audio-output of the Memotron to the line-level inputs of your audio system. Use
shielded high quality ¼ inch mono jack cables. By connecting only the „LEFT“ socket of the
Memotron, it can be hooked up to a mono audio system.
4. If you wish to play other MIDI-equipped sound generators from the Memotron’s keyboard,
connect the MIDI-out of the Memotron to the MIDI-in of these sound generators respectively
your MIDI-system.
5. If you wish to play the Memotron via a suitable external MIDI-keyboard or –sequencer (e.g.
the Manikin Schrittmacher), please connect the MIDI-in of the Memotron to the MIDI-out of
this external MIDI-device. Make sure to use suitable MIDI-cables.
6. Power ON the Memotron and subsequently your audio system (!)
7. Proceed with chapter „Basic Operation“ on the next page.
Memotron OS v1.3 User Manual 4