Owner manual

Q-1400 ICE MACHINE OR A Q-DUAL ICE MACHINE

ON AN S970 BIN USING K00213 ICE DEFLECTOR

Installation Instructions

Q-1400 Instructions

1. Remove splash shield, water pump, and water trough from ice machine.

2. Install ice deflector, as shown, using two #10-32 mounting screws and tapping plate. Center ice deflector directly

beneath water trough. Ice deflector must be secured with two mounting screws for proper operation of ice machine.

3. Reassemble water trough, water pump, and splash shield.

Manitowoc Ice, Inc.

2110 South 26

Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA 8006893

Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 Sheet 1 of 2

Web Site - www.manitowocice.com Rev. 06/13/03

Water

Pump

Splash

Shield

Water Trough

Ice Deflector

Frame Angle

#10-32 Mounting Screws

and Tapping Plate

PAGE 1
Q-1400 ICE MACHINE OR A Q-DUAL ICE MACHINE ON AN S970 BIN USING K00213 ICE DEFLECTOR Installation Instructions Q-1400 Instructions 1. Remove splash shield, water pump, and water trough from ice machine. 2. Install ice deflector, as shown, using two #10-32 mounting screws and tapping plate. Center ice deflector directly beneath water trough. Ice deflector must be secured with two mounting screws for proper operation of ice machine. 3. Reassemble water trough, water pump, and splash shield.
PAGE 2
Q-DUAL Instructions 1. Remove splash shield, water pump, spacer plate between water fitting bracket and frame angle, and water trough from ice machine. Discard spacer plate. 2. Install ice deflector, as shown, using two #10-32 mounting screws. Center ice deflector directly beneath water trough. Ice deflector must be secured with two mounting screws for proper operation of ice machine. 4. Reassemble water trough, water pump, and splash shield.