Owner's Manual

32 Part Number: 000013325 Rev 02 6/17
Operation Section 3
Units
1. From the Set-Up menu, use the Down arrow to highlight
Units.
2. Press the Checkmark. On this screen, you can choose
whether the ice machine will display measurements in
Celsius or Fahrenheit, kilograms or pounds, and gallons
or liters by highlighting your choice of each pair and
pressing the Checkmark. Selecting one of each pair will
deselect the other. Make sure to navigate with the Down
arrow to make all three choices.
3. When the three checks reflect your preferences, use
the Down arrow to navigate to Exit and press the
Checkmark. The display will return to the Set-Up menu.
Ice Clarity
In areas with poor potable water quality, the ice machine
makes cloudy ice. Setting Ice Clarity to ON will add additional
water during the freeze cycle to dilute the water that
contains a high content of dissolved solids in the water
trough. This feature decreases production and increases
water usage. A water filter is recommended to produce the
highest quality ice while maintaining the least expensive
mode of operation.
1. From the Set-Up menu, use the Down arrow to highlight
Ice Clarity.
2. Press the Checkmark. On this screen, you can choose
to turn the ice clarity feature ON or OFF by highlighting
your choice and pressing the Checkmark. Selecting one
will deselect the other.
3. When the check reflects your preference, use the Down
arrow to navigate to Exit and press the Checkmark. The
display will return to the Set-Up menu.
LCD Brightness
Here, the brightness of the LCD display can be adjusted.
1. From the Set-Up menu, use the Down arrow to highlight
LCD Bright.
2. Press the Checkmark. You will see one to four checkmark
symbols indicating the brightness levels of the display.
Level 1 is 1 checkmark, level 2 is 2 checkmarks, etc.
3. Use the Up and Down arrows to select your preference.
4. When the number of checkmark symbols reflects your
preference, press the Checkmark button. The display will
return to the Set-Up menu.
Password On
A password can be added to prevent unauthorized changes
to ice machine settings.
1. From the Set-Up menu, use the Down arrow to highlight
Password On.
2. Enter the password and press the Checkmark.
3. Press the Left arrow to return to previous screens and to
the Set-Up menu.
Edit Password
The password can be changed on this screen.
1. From the Set-Up menu, use the Down arrow to highlight
Edit Passwrd.
2. Press the Checkmark and confirm current password.
3. Enter new password and press the Checkmark.
4. Press the Left arrow to return to previous screens and to
the Set-Up menu.