Service manual

Section 9 Replacement Procedures
9-1
Section 9
Replacement Procedures
Evaporator Fan Motor
1 Section Refrigerators and Freezers
If Mounting Bracket Is Not Broken
1. Remove air distribution duct from the cabinet
interior ceiling (Figure 9.1).
2. Disconnect the (2) terminal connectors from the
motor (Figure 9.2).
3. Using a ¼” nut driver, remove the (2) motor
mounting screws and separate the motor from
the bracket (Figure 9.3).
4. Reverse steps 1-3 to replace motor.
5. Reconnect power and return to normal use.
NOTE: The evaporator-housing lid may be
removed to provide added lighting and visibility
(Figure 9.4).
Figure 9.1
Figure 9.3
Figure 9.4
Figure 9.2