Service manual

Replacement Procedures Section 9
9-2
Evaporator Fan Motor
1 Section Refrigerators and Freezers
If Mounting Bracket Is Broken
1. Remove the air distribution duct from the
interior ceiling (Figure 9.5).
2. Disconnect the (2) terminal connectors from the
motor (Figure 9.6).
3. Using a ¼” nut driver, remove the (2) motor
mounting screws and separate the motor from
the bracket (Figure 9.7).
4. Remove the evaporator-housing lid, located on
the cabinet top. (Figure 9.8)
5. Remove the coil mounting screws and carefully
lift the coil, only enough to gain access to the
motor mounting screws (Figure 9.9).
Continued next page…
Figure 9.5
Figure 9.6
Figure 9.7
Figure 9.8