Service manual

Section 9 Replacement Procedures
9-11
Door Handle (solid doors)
1. Remove the foot from the door lock assembly
(Figure 9.29).
2. Pry off gray plug button (located in the rear
center of the door) and a small section of the
door gasket nearest the lock assembly
(Figures 9.30 and 9.31).
3. Remove out the two mounting screws and
remove the door handle (Figure 9.32).
4. Reverse steps 1-3 to install the new door handle.
Figure 9.29
Figure 9.30
Figure 9.32
Figure 9.31