Owner's Manual

Section 4 Maintenance
Part Number 000007646 11/10 13
8. Remove the paddle wheel guard from the ice
dispense snout.
DISASSEMBLING THE DISPENSER PARTS FOR BIN
CLEANING
1. These parts will be removed: agitator pin, agitator
and paddle wheel.
2. Pull on the hand-removable agitator pin until it is
clear of the agitator bushing.
3. Push the agitator toward the back of the bin until the
agitator is free of the paddle wheel hub. Remove the
agitator by sliding to one side as you pull forward
until the agitator shaft clears the bushing.
4. Slide the paddle wheel from the motor shaft and
remove.
! Warning
Unplug unit before servicing or cleaning.
Ice dispenser bin contains moving parts that can
move at any time and will cause injury if hands are
in the way.
Paddle Wheel
Guard
Paddle Wheel
Agitator
Paddle Wheel Pin
Agitator Pin
Paddle Wheel Hub