Owner's Manual

Section 4 Maintenance
Part Number 000007646 11/10 15
Removal of the Gearmotor
NOTE: The gearmotor does not have to be removed for
cleaning/sanitizing.
1. Remove the front panel from dispenser.
(See “Removing the Front Panel”.)
2. Unplug the gearmotor wire.
3. Turn the two removal pins toward you.
4. Pull removal pins out to the right.
5. Grasp the gearmotor as the second pin is removed.
Pivot the gearmotor out of place.
!
Warning
Electric Shock Hazard
Unplug unit before servicing or cleaning.
Gearmotor
Wire
Remove
Pins