Owner`s manual

CREDITSCREDITS

CREDITS

An EveAnna Manley Production

Starring: Mitch Margolis as the circuit designer

Mastered by: Baltazar Hernandez

In keeping with our new tradition of naming fresh new Manley HIFI products after

aquatic creatures, we set out to design a very nifty 100 watt monoblock.

From Mitch's creative brain issued forth all the clever circuitry and schematic design.

Mitch worked closely with Joe Rodriguez in the Manley Magnetics department for two

months and through 19 prototypes to refine the quite interesting 19-section output

transformer that resulted from plenty of studied calculations, laborious winding and

lamming, and intensive batteries of tests both on the bench and in our listening environs.

All the tunes must pass through this iron beast before reaching the final speaker

destination and so it was an important thing to do right.

Balta did all the circuit board and metal work drawings and assembled the prototypes.

Humberto and Martin measured and aligned everything as Quality Control Technicians

are prone to do.

You can blame this silly manual on EveAnna and Mitch with some intelligent ramblings

contributed by Hutch. Chris added some not-quite-as-intelligent stuff later too. There

are no pretty pictures in this manual because everything is so clearly labelled on the

chassis and that epoxy paint Elias uses on the silk-screen is nearly impossible to get off

and so we didn't think you would mind having to just look directly at the amplifiers to

understand what we are talking about in these pages.

All the strange and extraneous remarks you have noticed so far in this Owner's Manual

have been put here on purpose because we know you will keep reading so you don't miss

the next quip. In the rare case that you find a mispelling or an error in grammer in this

Owner's Manuel, please consider that it was put there for a porpoise as their are all ways

sum peeple looking four missteaks and they mite as well fined them hear.

MANLEY SNAPPERMANLEY SNAPPER

MANLEY SNAPPER