Instruction Manual

INTRODUCTION
THANK YOU!...
for purchasing the Manley Laboratories HIGH FREQUENCY LIMITER. The Manley HIGH
FREQUENCY LIMITER utilizes a passive variable reactor circuit. Our version of De-esser
incorporates superior modern components with our proven line-amp superiority for absolute sonic
cleanliness... Conductive plastic potentiometers and sealed gold-contact switches, polystyrene and
rolled film and foil capacitors, and a brilliant mu-metal encased input transformer made in our own
magnetcs department in-house, combined with a hi-cap power supply and state-of-the-art tube
circuitry to bring the De-esser into the nineties and beyond....
Please take a few moments to read through this manual carefully as it contains information essential
to proper operation of this unit.
Thank you again, and please enjoy!
GENERAL NOTES
LOCATION & VENTILATION
TheHIGH FREQUENCY LIMITER must be installed in a stable location with ample ventilation. It
is recommended, if this unit is rack mounted, that you allow enough clearance on the top and bottom
of the unit such that a constant flow of air can flow through the ventilation holes.
WATER & MOISTURE
As with any electrical equipment, this equipment should not be used near water or moisture.
SERVICING
The user should not attempt to service this unit beyond that described in the owner's manual. Refer
all servicing other than tube replacement to Manley Laboratories.
WARNING!
TO PREVENT THE RISK OF ELECTRIC SHOCK
DO NOT OPEN THE CABINET
REFER SERVICING TO
QUALIFIED PERSONEL
!