Model # MB 00399NAT # MB 00399NAT-DISP USE AND CARE GUIDE MAAN 1 LIGHT PENDANT Questions, problems, missing parts? Before returning to the store, call Manor Brook Customer Service 8 a.m.-6 p.m., EST, Monday-Friday 904-642-4340 THANK YOU We appreciate the trust and confidence you have placed in Manor Brook through the purchase of this light fixture. We strive to continually create quality products designed to enhance your home.
Table of Contents Safety Information .................................................... 2 Assembly ..................................................................... 5 Warranty ................................................................... 2 Installation ............................................................5, 6, 7 Pre-Installation .......................................................... 3 Care and Cleaning ........................................................
Pre-Installation PLANNING INSTALLATION Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. Inspect each part for defects that may have occurred during shipping. Keep your receipt and these instructions for proof of purchase. NOTE: This light fixture requires the use of one 120V, 60Hz, 100-Watt max, medium-base type A bulb (not included). Do not exceed the recommended wattage.
Pre-Installation (continued) PACKAGE CONTENTS A B C Part Description Quantity A Chain loop 1 B Cap 1 C Fixture body 1 4
Assembly instructions 1 Assembling the light fixture 2 Preparing the light fixture to hang Carefully unpack the fixture, lay out all parts on clean surface. Attach the quick link (JJ) to one end link of chain (II) and attach the quick link (JJ) to the chain loop (A). Note: The quick link (JJ) must be fully treaded closed. Slide the cap (B) over the nipple, and then screw the chain loop (A) to the nipple on top of the fixture body (C) as shown.
Installation instructions 2 Connecting the wires 1 Installing the mounting plate Install the fixture bare copper ground wire (1) under the ground screw (EE) on the crossbar (BB). CAUTION: Ensure the power is off at the main fuse box prior to beginning installation. Connect the fixture bare copper ground wire (1) to the green (or bare, or green & yellow)supply ground wire (2) in the outlet box using a wire nut (AA). Turn off the switch at the wall. Turn the power off at the main fuse box.
Installation instructions (continued) 3 Installing the fixture and bulb Push all excess wires into the outlet box. GG Raise the fixture to the ceiling and secure the canopy (GG) in place with two finials (KK). KK Prior to installing the bulb, please inspect socket for silica packet, if packet is present, remove and throw away, do not expose to children and pets. Install one 120V, 60Hz, 100-watt max. medium-base type A bulb (not included) into the socket of the light fixture.
Questions, problems, missing parts? Before returning to the store, call Manor Brook Customer Service 8 a.m.-6 p.m., EST, Monday-Friday 904-642-4340 Retain this manual for future use.
