QUAD SOLAR FOUNTAIN Care and Instruction Manual
51057CONSOL ASSEMBLY INSTRUCTIONS Thank you for purchasing a Kenroy Home water feature, you are now only minutes away from filling your home or outdoor living space with peaceful displ ays. Our guarantee backs all of our water features, please do not hesitate to contact our Customer Support Team for resolutions to any parts or installation concerns. CUSTOMER SUPPORT TEAM For any additional questions or concerns please contact our Customer Support Team: 904-642-4340 @KenroyHome customerorders@kenroyhome.
51057CONSOL ASSEMBLY INSTRUCTIONS Please reference the separate parts list and ensure that all pieces are included in the package prior to assembly. More than one person may be required to complete the assembly of this product. To protect the finish, place all parts on a soft surface when unpacking. When assembling ensure that all parts are firmly tightened. Make sure solar panel is not in shadow and receiving direct sunlight.
51057CONSOL ASSEMBLY INSTRUCTIONS Please carefully open on a soft surface to avoid damage. Place reservoir (B) onto base (A) and twist the reservoir (B) clockwise to secure. B A Feed pump power cord (D) and light cord through the plastic tube. Cords should exit through notch in base (A). Attach the pump (D) to the rubber hose.
1057CONSOL ASSEMBLY INSTRUCTIONS Insert the cords into the slots in hole plug (J), and then insert the hole plug (J) into the plastic tube. Place the column assembly (C) into reservoir (B). C Slot J Plastic tube B Join the bracket (E), tube (F) and stake (G) together, then attach bracket (E) to back of the solar panel (H) as shown. Insert the stake (G) into the ground where the panel can receive direct sunlight.
51057CONSOL ASSEMBLY INSTRUCTIONS FINAL STEPS Fill Line Fill reservoir (B) with 2.6 gallons of distilled water a little above the min. fill line. Insert pump plug (larger plug) into the hole for pump (D) on back of the solar panel (H), then insert light cord plug (smaller plug) into the hole for light on back of the solar panel (H). Solar battery may have discharged during transit. Leave panel in direct sunlight for 2 hours to recharge before turning on the fountain.
51057CONSOL ASSEMBLY INSTRUCTIONS PUMP SAFETY & TROUBLESHOOTING To keep water clean • Periodically change water to prevent algae buildup. Filter sponge Filter/ Front cover Impeller cover Pump housing Rotor/Impeller If the pump fails to run: • Make sure the solar panel is receiving direct sunlight. Performance is directly related to the amount and strength of sunlight received. • See solar panel troubleshooting. You may need to boost charge or replace the battery.
51057CONSOL ASSEMBLY INSTRUCTIONS WATER FEATURE WARNINGS & SOLAR PANEL TROUBLESHOOTING Splashing may occur when the fountain is first turned on, protect surrounding surfaces as needed. Do not place the water feature on or near any surface that can be damaged by water. • Distilled water is recommended to reduce mineral deposits, bacteria build up and algae that may damage the water feature basin and pump.
51057CONSOL ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS What should I consider when selecting a water feature? In addition to your personal style tastes, be sure you have an area for your water feature that can be safely exposed to water, as splashing can occur. Also take into consideration what a water feature can add to your Can my water feature be left outside over winter? This water feature is rated for outdoor use; however certain weather conditions may adversely affect your water feature.
51057CONSOL ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS CONTINUED How much water do I need to keep in the water feature? Where possible in our water features, we have included fill lines to help you visualize the water level required for proper function. If your water feature does not include fill lines, please check the instruction manual for water capacity.
51057CONSOL ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS CONTINUED How do I level the water feature? For the water to flow properly, it is critical the water feature is level. If your water feature will be placed in an area with uneven ground, use a level and leveling shims to help level the water feature. Shims are wedge-shaped plastic parts that can be placed between the water feature and the ground to create a level surface. My tube is too long.
www.kenroyhome.