Model # MB 98265 USE AND CARE GUIDE DALTON 1 LIGHT SCONCE Questions, problems, missing parts? Before returning to the store, call Manor Brook Customer Service 8 a.m.-6 p.m., EST, Monday-Friday 904-642-4340 THANK YOU We appreciate the trust and confidence you have placed in Manor Brook through the purchase of this light fixture. We strive to continually create quality products designed to enhance your home.
Table of Contents Safety Information .................................................... 2 Assembly ..................................................................... 5 Warranty ................................................................... 2 Installation ................................................................... 5, 6 Pre-Installation .......................................................... 3 Care and Cleaning .......................................................
Pre-Installation PLANNING INSTALLATION Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. Inspect each part for defects that may have occurred during shipping. Keep your receipt and these instructions for proof of purchase. NOTE: This light fixture requires the use of one 120V, 60HZ, 100-Watt max, medium-base type A bulb (not included). Do not exceed the recommended wattage.
Pre-Installation (continued) PACKAGE CONTENTS Part Description Quantity A Fixture body 1 B Socket ring 1 C Shade 1 D Backplate 1 4
Assembly 1 Assembling the light fixture □ Carefully unpack the fixture and lay out all parts on clean surface. □ Remove the socket ring (B) from socket by unscrewing the socket ring (B). Installation 1 2 Installing the mounting plate CAUTION: Ensure the power is off at the main fuse box prior to beginning installation. □ Turn off the switch at the wall. □ Turn the power off at the main fuse box. □ Screw two mounting screws (DD) into the holes in the mounting plate (BB).
Installation (continued) 3 Hanging the light fixture □ Push all excess wires into the outlet box. □ Line up the holes of backplate (D) with the mounting screws (DD), and then secure the fixture body (A) to the wall with the two finials (GG). A DD GG 4 Assembling the shade □ Slide the shade (C) over the socket and secure with the socket ring (B). 5 Installing the bulb □ Prior to installing the bulb, inspect socket for silica packet. If packet is present, then remove and throw away.
Care and Cleaning □ Clean the light fixture with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives. Troubleshooting Problem Possible Cause Solution The bulb will not light. □ The bulb is burned out. □ Replace the light bulb. □ The power is off. □ Ensure that the power supply is turned on. □ There is a faulty wire connection. □ Check the wiring. □ The circuit breaker is off. □ Ensure that the circuit breaker is set in the on position.
Questions, problems, missing parts? Before returning to the store, call Manor Brook Customer Service 8 a.m.-6 p.m., EST, Monday-Friday 904-642-4340 Retain this manual for future use.