Installation Instructions
INSTALLATION INSTRUCTIONS
Important note: Under no circumstances should you use a cuer that may damage the walk-in bath outside
of the cung area. Doing so will void the warranty.
Important note: Do not alter the door ngs, tamper with the hinge or try to get a closer t on the seal.
The baths are completely water-tested prior to leaving the factory and all the tolerances and clearances are
factory-set. Tampering with the hinge or door seal will void the warranty.
minutes.
Important note: Do not use any solvent-based adhesives as these will damage the walk-in bath and will void
the warranty.