Datasheet

PRODUCT GUIDE & INDEX
anson
M
anson
M
VI
DC-DC Converters
Model Page Power Rating Key Features
Car Power Adapter
SDC-2010 45 Input: Cigarette plug for 12V & 24V car DC system
Output : 1.5/ 3/ 4.5/ 6/ 7.5/ 9/ 12Vdc 1.5A
7 selectable output voltage, 7 types of DC output plugs
Model Page Power Rating Key Features
Digital Car Power Adapter
SDC-5203 46 Input : Cigarette plug for 12V & 24V car DC system
Output : 1.5/ 3/ 4.5/ 6/ 7.5/ 9/ 12Vdc 1.5A
USB : 5Vdc 500mA
USB charging port for all mobile smart phones & devices;
Micro processor control; Digital key in select;
LCD display battery voltage, Load current;
Battery low voltage cut off to safeguard over discharge
Model Page Power Rating Key Features
Step Down Converters (Non-Isolated)
DD-105 37 Input : 22-28Vdc ; Output : 13.8Vdc 5A Non-Isolated, Linear, ON-OFF switch, Fuse with input cable, Housing
with mounting flange
DD-107 Input : 22-28Vdc ; Output : 13.8Vdc 5A
SDC-210 38 Input : 22-30Vdc ; Output : 13.8Vdc 8A Non-Isolated, Linear, ON-OFF switch, Car blade fuse, Mounting bracket,
Fan cool and Dual outputs for SDC-225 and SDC-245
SDC-225 Input : 22-30Vdc ; Output : 13.8Vdc 20A
SDC-245 Input : 22-30Vdc ; Output : 13.8Vdc 40A
SDC-5205 39 Input : 18-38Vdc ; Output : 13.8Vdc 5A
Input : 18-38Vdc ; Output : 13.8Vdc 7A
Input : 18-38Vdc ; Output : 13.8Vdc 12A
Input : 18-38Vdc ; Output : 13.2Vdc 18A
SDC-5208
SDC-5212
SDC-5220
Model Page Power Rating Key Features
Step Down Converters (Isolated)
SSDC-210 40 Input : 22-30Vdc ; Output : 13.8Vdc 8A
SSDC-240 Input : 22-30Vdc ; Output : 13.8Vdc 35A
SSDC-2215 41 Input : 22-30Vdc ; Output : 13.8Vdc 15A
Model Page Power Rating Key Features
Step Up Converters
SDC-310 42 Input : 10-15Vdc ; Output : 28Vdc 8A
SSDC-305 Input : 10-15Vdc ; Output : 28Vdc 5A43
Non-Isolated, Switching mode, ON-OFF switch, Car blade fuse, Mounting bracket
Isolated, Switching mode, ON-OFF switch, Car blade fuse, Mounting bracket
Model Page Power Rating Key Features
Step Up & Down Converters (Isolated)
SDC-8170 44 Input : 10-16Vdc ; Output : 13.5Vdc 4.5A
SDC-8270 Input : 20-32Vdc ; Output : 27Vdc 3A
Isolated, Switching mode, Regulated constant output voltage with wide input
voltage, Electronic reverse polarity protection, Input over & under voltage,
Loss of earth protection
• Non-Isolated, High efficiency with advanced switching mode design & SMT'
• Slim, compact & light construction in dust & tamper proof casing.
• Auto-reset over power, reverse polarity, OVP, reversed polarity protection
& loss of earth protection
• Clip on mounting bracket construction for easy installation
Overload and Short circuit protection
Dual Outputs, ON-OFF switch, Overload and Short circuit protection
ON-OFF switch, Overload and Short circuit protection
MISCELLANEOUS PRODUCTS & ACCESSORIES
SSB - 2112 / 2212
Multi Setting Battery Isolator
◘ All values are based on the Standard ambient Temperature 25°C and Pressure 0.1Mpa.
◘ SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
Specifications
Description
Features
WEIGHT
DIMENSION (L x W x H)
BATTERY VOLTAGE SYSTEM
ON/OFF Delay Time for Isolator Mode
Low Voltage Protection (No Delay)
Over Voltage Protection
Over Temperature Protection
LVD = Cut Out LVR = Cut In
Mode 0
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Mode 6
Mode 7
Protection Current (Start Point)
CONTINUOUS OUTPUT CURRENT
MAXIMUM OUTPUT CURRENT (delay 10-60 seconds)
VOLTAGE DROP WITH 100A (MAIN BATT. to AUX. BATT.)
OPERATION CURRENT CONSUMPTION (LED ON)
IDLE CURRENT CONSUMPTION (LED OFF)
OPERATION TEMPERATURE RANGE
OVER-RIDE FEATURE
INDICATION BY LED (TWO COLOR RED AND GREEN)
ISOLATOR SETTING
PROTECTION
MODELS
650g 23oz.
222x75x50 mm 8.7x3.0x2.0 inch
24VDC
SSB-2212
12VDC
15 seconds
8.5VDC ±0.5VDC
18.5VDC ±0.5VDC
Yes
LVD
10.5V
10.9V
11.2V
11.5V
11.9V
12.1V
12.4V
12.6V
140A
100A
120A
250mV
10mA
7mA
-40°C to +60°C
YES
YES
SSB-2112
LVR
12.9V
13.0V
13.1V
13.2V
13.3V
13.4V
13.5V
13.6V
LVD
21.0V
21.8V
22.4V
23.0V
23.8V
24.2V
24.8V
25.2V
LVR
25.8V
26.0V
26.2V
26.4V
26.6V
26.8V
27.0V
27.2V
17VDC ±1.0VDC
34.5VDC ±1.0VDC
Tolerance: ±0.2Vdc for 24Vdc sys.Tolerance: ±0.1Vdc for 12Vdc sys.
This unit when used between two batteries it is an isolator.
It isolates the main battery from the second battery and does not allow the
second battery to power car electronics or feed into the starting the car
unless emergency manual Over-Ride Connection is activated.
It only allows charging the second battery only when the starting battery is
full. It also diverts excess power from the alternator to run equipment that
feeds from the second battery. It prevents excessively large charging current
dumping into the depleted second battery from the starting battery.
When used with one battery and a load, it acts as a low voltage cutout to
keep the battery from over discharge according to you selected settings. It is
then termed as a Battery Protector.
There are 10 pairs of cut-in and cut-out voltages covering most common
applications and various types of battery.
A Micro-Processor monitors the terminal voltages at all times and controls the
on-off function according to the selected pairs of on and off voltages with
tight tolerance. Additional intelligent self recoverable protections have been
added to this new model to ensure long service life even in harsh operating
conditions.
• MCU controls with FET, no moving parts, all solid state, extremely low
standby current and voltage drop.
• 10 pairs of disconnect and re-connect voltages to select covering most
types of lead acid battery and the Lithium Fe Phosphate battery.
• Intelligent self recoverable protections in Over temperature, Over
voltage and Over current .
• Wide operating temperature range from -40°C to +60°C
• Emergency manual Over-ride to connect two batteries to supply extra
power to boost the starting of your car.
• Charge the second battery only when starting battery is full
• When used with a single battery, it acts as a low voltage cut-out to keep
the battery from being overdrawn.
Mode 8
Mode 9
12.8V
13.0V
13.7V
13.8V
25.6V
26.0V
27.4V
27.6V
APPROVAL
CE EN 61000
SDC-6203 47 Input : Cigar plug for 12V & 24V car/ lorry DC system
Output : 1.5/ 3/ 4.5/ 6/ 7.5/ 9/ 12Vdc 1.8A
USB for iPad and Tablets with supplied adapter cable
Separate 0.5A USB output
Micro Processor control, digital key in select, LCD display ; selected
output voltage, battery voltage, load current, battery low voltage
cut off USB Charging for iPad & Android based tablets