User`s manual

USER’S MANUAL
14
VOLUME (VOL)->BASS (BAS)-> TREBLE (TRE)-> BALANCE
(BAL)-> FADER (FAD) Rotate Volume Control to adjust desired
level within 5 seconds.
MENU BUTTON
Press MENU Button to navigate through the menu items,
while the desired menu item is displayed, use Volume control
to adjust the selected function:
DX MODE - Use this mode to change between Local and
Distant (DX) tuning mode. Local mode improves reception in
some areas where the signal is too strong.
AF ON/OFF - Use this mode to change between AF on or
AF o.
CLOCK ADJUST - Rotate the volume knob in clockwise direction
to adjust minute, other direction to adjust hour.
BEEP MODE (BEEP ON / OFF)
BEEP OFF: disable audible beep tone when any function is
accessed.
BEEP ON: enable audible beep tone.
EQ BUTTON (PRESET EQUALIZER)
EQ OFF->CLASSIC->POP->ROCK
At DSP o mode preset equalizer will be controlled by Bass
/ Treble setting.
ENCODER VOLUME KNOB
When the Menu function is not activated, rotate this knob to
change the volume level.
When Menu function is activated, rotate this knob to navigate
through dierent menu items.
MODE BUTTON
Press this button to select dierent mode , sequence as
follow:
A) Tuner mode (Radio)
C) USB (only if a USB drive is inserted)
D) SD / MMC (Only if a SD or MMC card is inserted)
E) AUX IN
MODE PRIORITY
Whenever a USB or SD/MMC is being inserted, unit will auto-
matically switch to USB or SD/MMC mode, does not matter the
unit is currently in what mode.
When in USB or SD / MMC mode, if the USB or SD / MMC is
being removed, unit will automatically switch to radio mode.
FRONT AUX INPUT
Connect the external signal to the front 3.5mm earphone jack
on front panel, then press Mode button to select Aux mode.
Press Mode button again to cancel Aux Mode and return to
previous mode.
INFO BUTTON
At Radio mode Press this button to view frequency of the sta-
tion in listening , clock time and program type ( PTY ) .
At Radio mode Press this button to view frequency of the
station in listening and clock time.
AUTO MEMORY STORE (AMS)
AUTO MEMORY STORE: press AMS button to enter auto store
mode. The radio will automatically store 6 stations to the 6 preset
memories of the current band. To stop auto store, press AMS
button again.
TUNING UP / DOWN BUTTON
Press this button to search for radio stations.
BAND BUTTON
Press this button to change between bands FM1,FM2,FM3,
MW(AM).
RESET BUTTON
The RESET button is located on the front panel (as shown on
the diagram). To press it vertically with a ballpoint pen or metal
object will activate it. The reset button is to be activated for the
following reasons:
Initial installation of the unit when all wiring is completed.
All the function buttons do not operate.
Error symbol on the display.
Note:
If the unit cannot function normally after reseting, please use
a cotton swab soaked inisopropyl alcohol to clean the socket on
the back of the control panel.
LIQUID CRYSTAL DISPLAY PANEL (LCD)
The LCD panel display the frequency, time and activated
functions.
NOTE: It is a characteristic of LCD panel that if subjected to cold
temperatures for an extended period of time, they will take longer