Manual

Ill. UNPACKING AND ASSEMBLY INSTRUCTIONS
A WARNING DANGER
BLADES ARE EXTREMELY SHARE TO
AVOID INJURY WHEN UNPACKING THE
HEDGE TRIMMER, DO NOT GRASP THE
BLADES.
Your Lit.tl_ H!ond_r hedge trimmer has been
assembled for you at the factory. Before operating be
sure all fasteners are secure, and all guards and safety
devices are in place and operating properly.
IV. OPERATION
A. INSTRUCTIONS FOR PROPER OPERATION
66
8
Securing the
extension cord.
Bend the extension
cord about 6" from
the plug end. Push
that bend through
the oblong opening
in the back of the
handle. Then loop
the bend under the
cord retaining clips
as shown. This will
prevent the extension
cord from detaching
from the hedge
trimmer plug.
Misuse of this Hedge Trimmer will void the warranty.
ie: cutting hedges or shrubs over 1/2" in diameter or
foreign objects such as wires, rocks, or fences. Before
trimming check work area for foreign objects such as
wires, cords, glass, fences, or rocks. Be sure to remove
any foreign objects from the work area. Failure to
properly maintain this hedge trimmer will void the
warranty.