Instructions / Assembly

ASSEMBLY

Final Check

Install any additional parts that are supplied with your bike.

NOTE: Your bicycle may be equipped with different style components

than the ones illustrated.

Reflectors: Attach the white reflector to the front bracket and the red

reflector to the rear bracket using a 8mm wrench or a Phillips head

screwdriver. Attach the brackets to the bicycle using the hardware

provided. For some models, the front reflector bracket will be mounted on

the front brake assembly bolt that fits through the fork. It is important to

make sure all connections are tightened securely and that the reflectors

are properly angled.

Pads: If your bike is supplied with pads, wrap the foam inner cushion

around the appropriate bar. Place the outer cover over the inner cushion

and press the velcro together securely. Turn the pad so the velcro faces

the ground.

Chainguards: If not already attached, attach the chainguard to the bicycle

frame using the clamps provided. Secure in place making sure the guard

does not bind or get caught on the chain.

Tire Pressure: Check tire pressure, inflate to the range recommended on

the tire sidewalls.

Before riding, ensure all nuts, bolts and fittings on the

bicycle have been correctly tightened.

Pads

Rear

Reflector

(Red)

Front

Reflector

(White)

Chainguard