Rev.
Easy Spin ComposTumbler™ Assembly Instructions Tools You Will Need 8 Before you start, gather the following tools: • Hammer • (2) 7/16” (11 mm) (or adjustable) wrenches • Phillips Screwdriver (cross head) • Regular Screwdriver (flat head) 1 1 Everything else you will need is included with your ComposTumbler.
STEP 1: Aerator Panel Assembly Select: • 1 Aerator Panel (large center hole) (item 4) • 1 Aerator Base (item 7) • 1 Aerator Cap (item 6) • 1 Wing Nut (item 14) • 1 Bolt, 1/4” x 3-1/4” (6 mm x 8.25 cm) (item 15) 15 6 1) Insert the 1/4” x 3-1/4” (6 mm x 8.25 cm) Bolt through the Aerator Cap and position them into the recess on the inside of the Aerator Panel. 2) Position the Aerator Base, smooth side inward, over the Bolt and into the recess on the outside of the Aerator Panel.
STEP 4: Drum Assembly Select: • 2 Endcaps (item 1) • 1 Aerator Panel Assembly (from Step 1) • 1 Front Panel (from Step 3) • 1 Back Panel (item 5) • 12 Screws, #14x1” (2.54 cm) (item 20) • 12 Flatwashers, 5/16” (8 mm ) (item 21) 18 19 1 5 4 Note: The TOP INSIDE of the Endcaps have no raised edge in the area of the large “D”-hole.
STEP 6: Frame/Drum Assembly Select: • 1 Drum Assembly (from Step 4) • 1 Axle Rod (item 9) • 2 Legs (item 10) • 1 Brace (item 11) • 2 1/4” Lock Nuts (item 12) • 2 Flatwashers, 1/4” (6 mm) (item 13) • 2 Bolts, 1/4” x 3-1/4” (6 mm x 8.25 cm) (item 15) • 2 Axle Bushings (item 16) • 2 Axle Rod Caps (item 17) • 4 Frame Caps (item 27) 15 17 11 9 15 10 17 10 1) Tap an Axle Rod Cap evenly onto one end only of the Axle Rod.
1028 Street Rd, Southampton, PA 18966 1-800-366-6268 If you have any questions or problems with your ComposTumbler assembly that aren’t covered by this booklet, please call us at 1-800-366-6268 We’ll be happy to help! Mantis 1028 Street Road Southampton, PA 18966 1-800-366-6268 www.mantis.com In the UK, please call us at 0800 988 4828 or call your local supplier. Freephone from UK BT landline. Mantis UK Ltd Orchard House Hempshaw Lane, Stockport, Cheshire SK1 4LH www.mantis.uk.
