Instructions / Assembly

27
ASSEMBLY
Seat and Seat Post
Attach the seat to the seat post by inserting the smaller end of the seat post
into the seat clamp and tighten. Insert the larger end of the seat post into
the seat tube of the bicycle frame observing the minimum insertion mark on
the seat post. Turn the adjusting nut of the Quick Release seat bolt to ensure
the locking lever is moved to the closed position with a firm action. Turn the
bicycle upside down and rest in on the seat and handlebars.
NOTE: Comfort bicycles may be equipped with a suspension seat post (See
Diagram-bottom left). Some suspension posts can be adjusted for stiffness
using the preload adjusting screw. Turning the 6mm Allen screw Clockwise
will decrease travel and make the suspension stiffer, while turning the
6mm Allen screw Counter-clockwise will increase travel and make the
suspension less rigid.
Note: In addition to normal assembly, please be aware that the preload
adjusting screw must be flush with the bottom of the post.
Failure to do this may cause irreparable damage.
The seat post must be inserted so that the minimum
insertion mark cannot be seen. The quick release
mechanism must be tightened securely to prevent a sudden
shift of the seat when riding Failure to do this may cause
loss of bicycle control.
Seat
Clamp
Seat
Post
Quick
Release
Adjusting
Nut
Attach
Seat Here
Boot
Minimum
Insertion
Mark
Insert this
end into
frame