User manual

5
Copyright © 2012 Future Technology Devices International Limited
RPi HUB Module Datasheet
Version 1.0
Document Reference No.: FT_000700 Clearance No.: FTDI# 297
3 Pin Out and Signal Description
3.1 Module Connector Descriptions
Figure 3.1 – RPi HUB Module Connector Description (Top View)
RPi HUB Module has 4 connectors on the board. The detailed descriptions of these connectors are listed in
Table 3.1.
Reference
Designator
Description
CN1
USB type A signal connector to connect to the host
port
CN2
Dual-port USB type A connector to connect 2
downstream USB devices
CN3
+5V power input from external PSU to power the
module.
J1
0.1” 2X12-pin header
J2
0.1” 2X12-pin header
Table 3.1 – RPi HUB Module Connector Descriptions
A detailed description of each pin out is given in the next section.