TRAMPOLINE MANUAL Trampoline
TRAMPOLINE PARTS LIST PARTS ITEM Erame cover A Junping Mat B Top Rail C Spring E Leg Extention F W-Shaped Leg G Screw H Two-in-one screw K Tool(Optional) I C A Frame Cover B Jumping Mat Top Rail K F Leg Extension G W-Shaped Leg E Spring H Screw Two-in-one screw I -1- Tools
TRAMPOLINE FRAME ASSEMBLY Refer to PARTS LIST for identification of parts WARNING – FOR 12FT AND 14FT MODELS AT LEAST 4 PEOPLE ARE REQUIRED TO MOVE THE TRAMPOLINE ONCE THE FRAME IS ASSEMBLED DUE TO THE QUANTITY AND TENSION OF SPRINGS WARNING: At least 2 adults in good physical condition are required for the following assembly. Wear proper shoes and maintain balance to prevent falling. Failure to follow all instructions and warnings exactly may result in serious injury. G F H 1.
TRAMPOLINE MAT & COVER ASSEMBLY ATTENTION: 2 adults may be required to complete placement of all springs E as illustrated in STEP13. Springs will Create high levels of tension when assembled. Please use extreme caution not to pinch your fingers. E 7. With stitching portion facing down, lay jumping mat inside frame and attach a spring into one of the triangle rings on the mat. Then attach spring with ring to frame. WARNING: Trampoline is under heavy tension.
11. Lay black frame cover on the outer edge, so springs are covered-just like a shower cap, tie all black straps to top rail of frame. Do not tie to springs! 12.
TRAMPOLINE SAFETY NET USER MANUAL -5-
PARTS LIST: Ref. No 4 10ft 3/4w 6/8 6/8 6/8 12/16 12ft 4w 8 8 8 16 14ft 4/5w Bottom tube Top tube Top cap Fork screw 8ft 3w 6 6 6 12 5 Enclosure net 1 1 6 Fiberglass rod 6 7 Metal connection 8 Rope 1 2 3 Description 1 6 /2 0 15ft 4/6w 8/12 8/12 8/12 16/24 16ft 4/6w 8/12 8/12 8/12 16/24 1 1 1 1 6/8 8 8 /1 0 8/12 8/12 6 6/8 8 8 /1 0 8/12 8/12 2 3 3 3 4 4 PHOTOS OF PARTS: 1. Bottom Tube: 2. Top Tube 3. Top cap 4. Fork Screw 5. Enclosure Net 6. Fiberglass Rod 7.
The specifications and product features described in this manual are current at the time of printing. However, changes may be made in equipment, availability, specifications and features without notice. ASSEMBLY INSTRUCTIONS 1. Firmly fix the bottom tube (1) to the leg extension with the fork screws(4), and then fasten the fork screw by wrenching on the nut. (1) (1) C (4) 2. Connect the bottom tube(1) to the top tube(2). (2) (1) 3.
4. Pass the ropes(8) through the under part of the enclosure net(5) and the triangular rings around the mat in a zigzag style. Continue around the edge of the entire net, and then tie a knot to secure the rope. 5. Repeating with the remaining rods until they all connect. To make the last connection, have one person stand on the opposite side from you, push the rods towards the centre of the ring until they are in line with each other and make the last connection, as shown in the picture below. 6.
7. Your trampoline safety enclosure is now complete! IMPORTANT For your safety, make sure to securely fasten enclosure entrance prior to using trampoline with safety net. PLEASE READ!!! IN CASE OF MISSING OR BROKEN PARTS, PLEASE CONTACT PLACE OF PURCHASE FOR ASSISTANCE. BEFORE YOU BEGIN USING YOUR SUPERFLY TRAMPOLINE Read and understand all the information provided to you in this manual.
As with all physical sports and activities, there is some risk of injury if care is not taken. To avoid injuries and ensure your future enjoyment of the trampoline, be sure to follow these safety rules and tips. GENERAL SAFETY INSTRUCTIONS Please read and follow all instructions before you start using your trampoline. You should inspect the safety net before each use for bent steel tubes, torn mat, loose or broken springs and overall stability of the trampoline.
