Instructions / Assembly

TRAMPOLINE FRAME ASSEMBLY

WARNING – FOR 12FT AND 14FT MODELS AT LEAST 4 PEOPLE ARE REQUIRED

TO MOVE THE TRAMPOLINE ONCE THE FRAME IS ASSEMBLED DUE TO THE

QUANTITY AND TENSION OF SPRINGS

1. Lay out all trampoline parts in groups. (Just like picture)

2. Begin by attaching two leg extensions F to assemble one “W”Shape leg with rail screws H.

3. To assemble top rail, attach all the Top rails using the T connection to fasten them together

with two-in-one screws K.

4. Continue until you form a large circle. Joining the last link may require two or more adults

in good physical condition. With a second person holding the opposite end, bring both Sides

of the circle firmly together and Make them secured.

5. Attach the “W” leg assembly to the top frame. This is the KEY Step: top rail B (short one,

without welded tubes) must be placed firmly inside the “W” leg assembly, that’s very

important (just like picture).

6. Now the frame assembly is complete.

WARNING: At least 2 adults in good physical condition are required for the

following assembly. Wear proper shoes and maintain balance to prevent falling.

Failure to follow all instructions and warnings exactly may result in serious injury.

Refer to PARTS LIST for identification of parts

-2-