Instructions / Assembly

ATTENTION: 2 adults may be required to complete placement of all springs E
as illustrated in STEP13. Springs will Create high levels of tension when
assembled. Please use extreme caution not to pinch your fingers.
7. With stitching portion facing down, lay jumping mat inside frame and attach a spring into
one of the triangle rings on the mat. Then attach spring with ring to frame.
WARNING: Trampoline is under heavy tension. More effort may be required to attach springs
to frame. Be careful not to pinch fingers or slip. Serious injury may occur!
8. Repeat this step directly across from where you attached first spring. Then attach two more
springs half distance between the first two, directly across from each other.
9. Use spring tool（I）as shown, springs are placed on frame securely, require adjacent
springs to be attached every four or five holes, making the springs tension evenly distributed.
10. Attach remaining springs until all springs under heavy tension.
TRAMPOLINE MAT & COVER ASSEMBLY
E
I
-3-