Instructions / Assembly

5. Repeating with the remaining rods until they all connect. To make the last connection, have one
person stand on the opposite side from you, push the rods towards the centre of the ring until they
are in line with each other and make the last connection, as shown in the picture below.
6. Raise the net up into position and clip the ring into the top caps.
4. Pass the ropes(8) through the under part of the enclosure net(5) and the triangular rings around
the mat in a zigzag style. Continue around the edge of the entire net, and then tie a knot to secure
the rope.
-8-