Product Overview

• Made in the USA

• 100% recyclable material

• Extruded aluminum design

• Pre-cut 6” up to 10’

• Solid flat base with rolled edges

• Integrated 1 5/8” Strut

• Industry standard accessories

• Single/multiple piping runs

• Equipment supports

• Load factor of 5 PSI

• Available with adhered isolation pad

• Simple time saving installation

• Patent Pending

•

MAPA Products, A-Series supports are manufactured as an extruded aluminum base

with integrated 1 5/8” shallow strut available in lengths from 6 inches up to 120 inches.

Used within the recommended load limits, the A-Series is designed as a free

standing/non-penetrating pipe support stand for applications including natural gas,

conduit, refrigeration; ductwork, cable trays, solar panel and equipment support.

A-Series supports provide a price conscious alternative that is simple to install, saving

time and labor on the project.

Integrated strut allows the use of any industry standard strut accessory to provide

additional versatility.

Simple installation, evenly space the supports within their load rating; for piping provide

an additional support within two feet of each change in direction.

A-Strut Series Pipe Supports: Available in lengths of 6, 8,

10 and 12 inches. Change strut length in model number as

shown below.

Engineering Specification & Detail:

Support for pipe, conduit, duct, refrigeration lines, solar

panels, cable trays and equipment support shall be MAPA

Products A-Series Supports. Manufactured from extruded

aluminum with an integrated industry standard strut designed

to allow for a “free-standing”, “non-penetration” installation that

can incorporate readily available strut accessories.

Optional: Provide support with adhered isolation pad

installed in accordance with the project manager or other

designated roofing professional.

Overview

Engineering Specification Guide

Features

MA-6SF4

A-Series Strut Support

Contact Information

Model: MA-6SF4

PAGE 1
MA-6SF4 A-Series Strut Support Model: MA-6SF4 Features • • • • • • • • • • • • • • Made in the USA 100% recyclable material Extruded aluminum design Pre-cut 6” up to 10’ Solid flat base with rolled edges Integrated 1 5/8” Strut Industry standard accessories Single/multiple piping runs Equipment supports Load factor of 5 PSI Available with adhered isolation pad Simple time saving installation Patent Pending Overview MAPA Products, A-Series supports are manufactured as an extruded aluminum base with inte
PAGE 2
Designed and manufactured in compliance with the MSS SP-58 and MSS Advantages Gu • Made in the USA • Simple labor-saving installation, ready to use out of the box with no assembly needed. • Extruded Aluminum with integrated 1 5/8” shallow strut allows the use of any standard strut • • • • • • • • accessory. Versatile design allows for a variety of Mechanical, Electrical and Plumbing applications. Support for pipe, conduit, duct, refrigeration lines, solar panels, cable trays and equipment support.