User manual

MapAsia.com Limited MapKing2007
《Figure2-1-1c》Check Pocket PC for
the installation status
2.1.2 Map Data Installation
MapKing™ offers an extensive range of map products and we cannot determine in advance the
specific map(s) chosen by a customer. A DEMO Map is included in the set up file to verify that
the core program has been installed and display successfully. To use a full map you have
purchased, please follow the steps below:
Step 1: Enable ActiveSync connection between PC and Pocket PC.
Step 2: Copy the map file (File extension .m7a) you have purchased from your CD-ROM.
XXX_Eng.m7a represents English map files.
XXX_TC.m7a represents Traditional Chinese map files.
XXX_SC.m7a represents Simplified Chinese map files.
Step 3: Paste the file to Storage\Program Files\MapAsia\MapKing2007 or My
Documents.
If you’d like to place the map file in your storage card, please create a folder name ‘My
Documents’ and place it there. ‘My Documents’ is the fixed default path used by MapKing2007
to locate map file.
2.2 Product Registration
This product MUST be register to activate permanently. The Maps in CD-ROM except the
licensed map are for trial only. You may also download the trial version from
http://www.MapKing.com. Please reference to 2.1 for installation of map data for trial, and
reference to 2.3 to switch map in program.
2.2.1 Obtain MKID
After you start MapKing2007 program from PPC
screen is the registration page. The registration page
is shown on the right. You should see MK ID that is
generated from the unique hardware device signature
embedded in the hardware.
Attention: The MKID must be input correctly to
achieve the correct registration code.
《Figure2-2-1a》Registration
Page 9