User manual

MapAsia.com Limited MapKing2007
2.2.2 Obtain Registration Code Online
orization card
ollow the steps below:
om http://www.MapKing.com.
ake sure you input the correct MKID.
. Input the information request correctly. This information is confidential and will use for
’ for registration.
Remarks: In case there is a change of the MKID due to ha or
entre or write to the MapKing™ support
From the package, you will have a product auth
Code’ .To get the ‘Product Registration Code’, please f
1. Connect to Internet and choose registration fr
2. Input the ‘Product Authorization Code’.
3. Input the MKID and m
with a ‘Product Authorization
4
upgrade notification and promotion.
5. Get the ‘Product Registration Code
rdware problem, ROM upgrade
other reasons, please contact Hardware Service C
service for the new registration.
2.3 Launch MapKing™
MapKing™ is launched in the similar way like other software installe
should find the MapKing™ program icon in the main screen. Tap it to launch MapKing™. If
d in your Pocket PC. You
alle .
MapKing™ does not show up in the main screen, select ‘Start’ > ‘Programs’ to list all programs
d in your PPC and you could then lauinst nch MapKing™
2.3.1 Switch Map
User may have more than one map installed. Select ‘Tools’ > ‘Open Map’ will bring up a list of
aps. Simply tap on any item within the list and press ‘Select’ to switch to a new map. m
《Figure2-3-1a》Press ‘Tools’ > ‘Open Map’ 《Figure2-3-1b》Press ‘Select’
2.4.2 Close Map
Press ‘Tool’ > ’Exit’ to close MapKing™. Please be the
background if you do not exit the program, which o
2.5 Remove MapKing™
reminded that ‘MapKing™ will run on
ccupied resource of your device.
Follow steps below to remove/ uninstall MapKing2
1. Press ‘Tool’ > ‘Exit’ to close MapKing2007.
move P
007 program:
2. Press ‘Start’ >’Setting’ > ‘System’ > ‘Re rogram’.
Page 10