Installation Guide

ManualsBrandsMAPEI ManualsGrout47752

DESCRIPTION

Kerapoxy CQ is an improved, two-component, 100%-solids epoxy grout and

mortar that is nonsagging/nonslumping in joints up to 3/8" (10 mm) in width,

water-cleanable and easy to apply. Kerapoxy CQ uses a proprietary aggregate to

achieve its durable color, making it excellent for countertops, high-traffic areas,

and areas needing stain and chemical resistance. Easy to maintain, Kerapoxy

CQ will clean to the original color and contains BioBlock

technology to help

protect against mold and mildew.

FEATURES AND BENEFITS

• Superior workability and water cleanability for ease of application

• Nonsagging and nonslumping in joints, for use in both floor and wall

applications

• Color consistency and durability

• For grout joints from 1/16" to 3/8" (1,5 to 10 mm)

• No sealer required

• High stain resistance*

* With immediate cleaning and proper maintenance, Kerapoxy CQ grout is

highly resistant to staining when exposed to most common household goods and

cleaning agents. Long-term exposure to any material can increase the potential

for staining grout.

INDUSTRY STANDARDS AND APPROVALS

• ANSI: Meets A118.3 requirements

• ISO 13007: Classification R2/RG

LEED v3 Points Contribution LEED Points

MR Credit 5, Regional Materials** ..................................... Up to 2 points

IEQ Credit 4.1, Low-Emitting Materials –

Adhesives & Sealants .....................................................................1 point

IEQ Credit 4.3, Low-Emitting Materials – Flooring Systems .............1 point

** Using this product may help contribute to LEED certification of projects in the

categories shown above. Points are awarded based on contributions of all

project materials.

WHERE TO USE

For use as a grout

• For grouting most ceramic, porcelain and quarry tiles; acid-resistant floor

brick; pavers; and natural-stone tile***

• For grouting interior residential and commercial floor/wall applications

• For grouting exterior residential and commercial floor applications

(contact MAPEI’s Technical Services Department)

• For industrial, commercial and institutional installations with high-

strength, chemical-resistant and nonsagging grout requirements, see

“Chemical Resistance” chart in this document. For extreme industrial

or commercial applications such as dairies, breweries and high-volume

food kitchens, Kerapoxy IEG CQ is recommended.

• For heavy traffic areas such as subway stations, shopping malls and

airport terminal buildings

• For areas requiring stain-resistant grout such as countertops and vanities

Premium Epoxy

Grout and Mortar

with Color-Coated

Quartz

Kerapox

Kerapoxy

Version: July 5, 2016

Summary of content (8 pages)

PAGE 1
Version: July 5, 2016 y x o p a r Q e C K ® Premium Epoxy Grout and Mortar with Color-Coated Quartz DESCRIPTION LEED v3 Points Contribution Kerapoxy CQ is an improved, two-component, 100%-solids epoxy grout and mortar that is nonsagging/nonslumping in joints up to 3/8" (10 mm) in width, water-cleanable and easy to apply. Kerapoxy CQ uses a proprietary aggregate to achieve its durable color, making it excellent for countertops, high-traffic areas, and areas needing stain and chemical resistance.
PAGE 2
xy o p a Ker CQ ® For use as a mortar gypsum floor-patching compounds or similar dimensionally unstable substrates. • For setting most ceramic, porcelain and quarry tiles, acid-resistant floor brick, pavers and natural-stone tile*** • Do not use for setting white or translucent marble. • For the installation of moisture-sensitive natural stone and their agglomerates.
PAGE 3
MIXING to the joint line using a nonwoven, nylon, white scouring pad (use a more aggressive pad if the tile has an abrasive surface). Apply enough pressure on the pad to loosen any film without removing grout from the joints. Rinse pads frequently while cleaning. Be careful not to get any water in the ungrouted joints. Choose all appropriate safety equipment before use. Refer to the Safety Data Sheet for details. 1. Parts A and B are packaged to exact quantity ratios for proper curing. 2.
PAGE 4
xy o p a Ker CQ ® Step 7. For more severe cases of epoxy grout haze, use MAPEI’s UltraCare ™ Epoxy Grout Haze Remover. For use as a mortar 1. 2. Remove the mixed product from the container and place it in piles on the floor. Kerapoxy CQ is a thermosetting product, so it sets faster in a container or a large mass.
PAGE 5
CHEMICAL RESISTANCE (tested according to ISO 13007) Resistance to chemicals depends on the concentration, temperature and duration of exposure. For long-term durability and improved grout appearance, clean up spills immediately after they occur. Laboratory tests reveal variable resistance to certain chemicals. The following table may be considered as a general guide for Kerapoxy CQ applications at 73°F (23°C).
PAGE 6
xy o p a Ker CQ ® ISO 13007 Classification Classification Code Test Characteristics Classification Requirement Abrasion resistance ≤ 0.015 cu. in. (250 mm3) Flexural strength RG (reaction resin grout) > 4,350 psi (30 MPa) † Compressive strength > 6,525 psi (45 MPa) † Shrinkage† < 0.06 in./3.28 ft. (1,5 mm/m) Water absorption† < 0.0002 lb.
PAGE 7
xy o p a Ker CQ ® Approximate Coverage* • For use as a grout** Coverage per 1 U.S. qt. (946 mL) Tile Size Grout Joint Width 1/16" (1,5 mm) 1/8" (3 mm) 1/4" (6 mm) 3/8" (10 mm) 1" x 1" x 1/4" (25 x 25 x 6 mm) 14 sq. ft. (1,30 m2) 8 sq. ft. (0,74 m2) 4 sq. ft. (0,37 m2) 3 sq. ft. (0,28 m2) 2" x 2" x 1/4" (50 x 50 x 6 mm) 27 sq. ft. (2,51 m2) 14 sq. ft. (1,30 m2) 8 sq. ft. (0,74 m2) 6 sq. ft. (0,56 m2) 3" x 3" x 1/4" (75 x 75 x 6 mm) 40 sq. ft. (3,72 m ) 20 sq. ft. (1,86 m ) 2 11 sq. ft.
PAGE 8
xy o p a Ker CQ ® RELATED DOCUMENTS Reference Guide: Surface Preparation Requirements for tile and stone installation systems RGT0309* Installation Guide for Kerapoxy CQ IGT0111* Grout Troubleshooting Guide* * At www.mapei.com Refer to the SDS for specific data related to health and safety as well as product handling.