Installation Guide

ManualsBrandsMAPEI ManualsIndoor Floor Sealers5LA000052

DESCRIPTION

UltraCare Grout Refresh is a nonflammable, ready-to-use, water-based, polymer-

modified colorant and sealer for grout joints. It can be applied onto and bonds to

cement, epoxy, urethane and acrylic grouts.

FEATURES AND BENEFITS

• Allows grout to be changed to any UltraCare Grout Refresh color

• Restores the look of tile grout

• Seals to protect against most common stains

• Available in all 36 of MAPEI's standard grout colors

• Easy to apply and clean

• Creates a uniform color

INDUSTRY STANDARDS AND APPROVALS

LEED v3 Points Contribution LEED Points

MR Credit 5, Regional Materials* .......................................Up to 2 points

IEQ Credit 4.1, Low-Emitting Materials –

Adhesives & Sealants .....................................................................1 point

* Using this product may help contribute to LEED certification of projects in the

categories shown above. Points are awarded based on contributions of all

project materials.

WHERE TO USE

• For interior/exterior use

• For revitalizing old grout joints

• For use on cement, epoxy, urethane and acrylic grouts

• For vertical and horizontal applications

LIMITATIO NS

• Do not install over substrates containing asbestos.

• Do not clean with solvent-based cleaners once UltraCare Grout Refresh

has been applied.

• Porous tile may require prior sealing with MAPEI's UltraCare Penetrating

Plus Stone, Tile and Grout Sealer to prevent the color of UltraCare Grout

Refresh from absorbing into the tile.

• Do not use in submerged areas, such as pools or hot tubs, or in areas

subject to hydrostatic pressure.

• For new installations, grout should cure for at least 48 hours before being

sealed.

• Use only when the substrate and ambient temperatures are between 50°F

and 95°F (10°C and 35°C).

SUITABLE SUBSTRATES

• Sanded grout joints

• Unsanded grout joints

• Epoxy grout joints

• Acrylic grout joints

• Urethane grout joints

Consult MAPEI’s Technical Services Department for installation recommendations

regarding substrates and conditions not listed.

Grout Refresh

BEFORE

AFTER

Summary of content (2 pages)

PAGE 1
BEFORE Grout Refresh AFTER DESCRIPTION • For use on cement, epoxy, urethane and acrylic grouts UltraCare Grout Refresh is a nonflammable, ready-to-use, water-based, polymermodified colorant and sealer for grout joints. It can be applied onto and bonds to cement, epoxy, urethane and acrylic grouts.
PAGE 2
SURFACE PREPARATION • • Shelf Life and Application Properties Substrate should be clean and free of dust, dirt, oil, grease, paint, curing agents, concrete sealers, loosely bonded toppings, loose particles, and any other substance that may prevent or reduce adhesion. See MAPEI’s “Surface Preparation Requirements” document in the Product Information section of the Tile & Stone Installation Systems page on MAPEI’s Website.