SDS

Use adequate protective respiratory equipment.
9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
Physical state: Solid
Appearance and colour: Powder grey
Odour: Cement like
Odour threshold: N.A.
pH in Water Dispersion: 11.50
Melting point / freezing point: N.A.
Initial boiling point and boiling range: N.A.
Flash point: Not Applicable
Evaporation rate: N.A.
Upper/lower flammability or explosive limits: N.A.
Vapour density: N.A.
Vapour pressure: N.A.
Relative density: 2.15 g/cm3
Solubility in water: Soluble
Solubility in oil: N.A.
Partition coefficient (n-octanol/water): N.A.
Auto-ignition temperature: N.A.
Decomposition temperature: N.A.
Viscosity: N.A.
Explosive properties: N.A.
Oxidizing properties: N.A.
Solid/gas flammability: N.A.
Other information
Substance groups relevant properties: N.A.
Miscibility: N.A.
Fat Solubility: N.A.
Conductivity: N.A.
10. STABILITY AND REACTIVITY
Reactivity
Stable under normal conditions
Chemical stability
Data not Available.
Possibility of hazardous reactions
None.
Conditions to avoid
Stable under normal conditions.
Incompatible materials
None in particular.
Hazardous decomposition products
None.
11. TOXICOLOGICAL INFORMATION
Information on toxicological effects
Toxicological information of the mixture:
There is no toxicological data available on the mixture. Consider the individual concentration of each component to assess
toxicological effects resulting from exposure to the mixture.
Toxicological information on main components of the mixture:
Silica Sand a) acute toxicity LD50 Oral Rat = 500mg/kg
If not differently specified, the information required in the regulation and listed below must be considered as N.A.
a) acute toxicity
b) skin corrosion/irritation
c) serious eye damage/irritation
d) respiratory or skin sensitisation
e) germ cell mutagenicity
Page n. of4 8
5/24/2016
Production Name
ULTRAFLEX 2 GRAY
Date