Installation Guide

ISO 13007 Classication
Classication Code Test Characteristics Classication Requirement
CG2 (cementitious grout, improved) Shrinkage ≤ 0.30% shrinkage in 28 days
W (reduced water absorption) Water absorption ≤ 5 g after 4 hours
A (high abrasion resistance) Abrasion resistance ≤ 1,000 mm
3
F (rapid-setting) Compressive strength ≥ 2,175 psi (15 MPa) after 24 hours
ANSI Specication
Test Method Specication Standard Test Results
ANSI A118.7 – compression 3,000 psi (20,7 MPa) at 28 days
3,000 to 5,500 psi
(20,7 to 37,9 MPa) at 28 days
ANSI A118.7 – shrinkage < 0.20% at 27 days < 0.20% at 27 days
ANSI A118.7 – tensile strength 500 psi (3,45 MPa) at 28 days
500 to 600 psi
(3,45 to 4,14 MPa) at 28 days
ANSI A118.7 – water absorption
< 5% (50% relative humidity
to immersion)
< 5% (50% relative humidity
to immersion)
ANSI A118.7 – flexural strength 1,000 psi (6,90 MPa) at 28 days
1,000 to 1,400 psi
(6,90 to 9,66 MPa) at 28 days
Shelf Life and Product Characteristics (before mixing)
Shelf life
1 year when stored in original, unopened packaging
at 73°F (23°C) in a dry area
Physical state Powder
Application Properties at 73°F (23°C) and 50% relative humidity
Mixing ratio
Per 10 lbs. (4,54 kg) of grout powder: 1 to 1.1 U.S. qts.
(0,95 to 1,04 L) of water
Per 25 lbs. (11,3 kg) of grout powder: 2.6 to 2.8 U.S. qts.
(2,46 to 2,65 L) of water
VOCs (Rule #1168 of California’s SCAQMD) 0 g per L
Pot life* 30 minutes to 1 hour
Application temperature range 50°F and 100°F (10°C and 38°C)
Curing time* 72 hours
* Pot life and curing time vary based on jobsite conditions, including cold temperatures or high humidity.
Packaging
Size
Bag: 10 lbs. (4,54 kg)
Bag: 25 lbs. (11,3 kg)