Manual

EZwarePlus Programming Manual 115
1010-1015, Rev. 03
The object can be configured to handle insufficient security in one of two ways:
 The object can be hidden while security is not sufficient (Make invisible while protected).
 The HMI can display the message defined as Message 1 in the System Message object
(Display warning message if access denied).
There are a number of local HMI addresses that can be used with the security features.
Address
Description
Data Type
Notes
LB9050
Reset security level to 0 (no security)
Boolean
Set momentarily to trigger.
Also serves as user logout.
LB9060
Invalid password
Boolean
Set by the HMI when an invalid
password is entered. Must be
explicitly reset.
LB9061
Load new passwords
Boolean
Loads new passwords as defined by
LW9500-9523
LW9219
User level
16-bit unsigned
Set to 1-12. Determines which
password is used.
LW9220
Password
32-bit unsigned
Enter password into this address to
change the security level