Owner manual

51 MAPware-7000 Ladder Logic Guide
1010-1041 rev. 00
 If the divisor (operand B) is 0, the ERF (instruction error flag = S1010) is set to ON.
The ERF (S1010) can be reset to OFF by user program, e.g. [ RST S1010 ].
 If the index register K is used as operand C, the remainder is ignored.
 If operand A is -32768 and operand B is -1, the data +32768 is stored in C and 0 is stored
in C+1.