User guide
STEP1 Protocol Operation Manual
1010-0096, Rev 04
E
Extended Character Sets 41, C-1
Inserting into a Predefined Message 41
MAP320D, OIT3200, OIT3250 C-2
MAP340D, OIT4400, OIT4450 C-3
MAP460D, OIT3100 Series, OIT3600,
OIT4100 Series C-1
OIT5400 C-4
F
Function Keys 47
Configuring as Shift, Delete, Enter or Clear 47
Disabling 51
Displaying Predefined Messages 48
Function Key ASCII String 48
Function Key Control control command A-6
Momentary 50
Momentary Tutorial 7
Push-on/Push-off 49
Push-on/Push-off Tutorial 4
Screen Function Key control command A-6
Sending Message to Host 49
Sending Message Imediately A-9
Shifted Function Keys 51
Shifted Function Keys Tutorial 7
G
Getting Started 1
H
Handshaking 26
Enable Handshaking control command A-4
I
Interactive Mode 35
J
Jumpers 17
K
Key Click 33
Keyboard Input Buffer
Clear Output Buffer control command A-5
in Block Mode 36
in Network Mode 38
Request Keyboard Buffer Status
control command A-7
Keyboard Layout D-1
Keyboard Output Buffer
Clear Output Buffer control command A-5
in Network Mode 38
Poll OIT Buffer control command A-6
Retransmit Last Keyboard Buffer
control command A-6
L
LEDs 53
Function Key LED control command A-7
Status LED control command A-7
System LED control command A-7
Line Terminator 27
in Control Commands A-1
in Network Mode 37
Set Line Terminator control command A-5
Local Echo 29
Display Format Control control command A-3
in Interactive Mode 35
Local Keyboard 32
Local Setup 33
M
Messages, Predefined 44
Display Message control command A-5
Optional Settings for Predefined Messages 45
Tutorial 3
N
Network Mode 37
Addressing 31, 38
Global Broadcast 38
Keyboard Input Buffer 38
Keyboard Output Buffer 38
Sample Network Session 39
Network Termination 19
Grounding 20
O
Operating Modes 35
Block Mode 36
Interactive Mode 35
Network Mode 37
Set Operating Mode control command A-4
P
Parity 25
Password 33
Printer 53
Configuring STEPware-100 54
Print Screen control command A-6
Print Text control command A-7
S
Slide-in Legends E-1
STEP1 ii
STEPware-100
Installing 1
Tutorial 2
Stop Bits 25
System Requirements 1
T
Tab Width 31
Set Tab Character Width control command A-4
Troubleshooting F-1
Turn-Around Delay 29
in Network Mode 38
Set Turn-Around Delay control command A-4
W
Wiring 14
RS-232 (Interactive & Block modes) 15
RS-422/485 (Interactive & Block modes) 15
RS-422/485 (Network mode) 16