Specifications

23G-Series RO System
3024270 Rev G 35 14Oct13
7. To recall factory settings:
a. Go to the Factory Settings Menu (menu 11).
b. Push ENTER switch. The screen will display two lines of
factory settings.
c. Enter passcode (Section 4.2.6) to restore factory settings.
Contact your equipment supplier for assistance.
4.2.8 Display Menus
01 Date and Time
The Date and Time Menu should be used to change/update the
respective display.
Press ENTER to select. Enter the passcode (Section 4.2.6) to allow
for date and time adjustment. Use the ARROW keys to raise and
lower the value, then press ENTER to store and advance to the
next alarm. When all the limits have been entered, the ECM-100
will automatically return to the default menu.
02 Alarm Limits
The Alarm Limits Menu should be used to change/modify the alarm
duration(s) and setpoint(s).
Press ENTER to select. Press ENTER to advance through the list.
Enter the passcode to adjust any of the settings. Use the ARROW
keys to raise or lower the alarm limit value, then press ENTER to
store and advance to the next alarm setting or ESC to exit and
leave the value unchanged. When all of the timers have been
entered, the ECM-100 will automatically return to the default menu.
03 Timer Presets
The Timer Presets Menu should be used to change/modify timer
durations.
Press ENTER to select. Press ENTER to advance through the list.
Enter the passcode to adjust any of the settings. Use the ARROW
keys to raise or lower the timer preset value, then press ENTER to
store and advance to the next timer. When all of the timers have
been entered, the ECM-100 will automatically return to the default
menu.
04 Accumulated Hours
The Accumulated Hours Menu is used to display machine run time
and nonrunning time. Times are displayed in hours.
Press ENTER to view the accumulated hours for “RUN” time and
“OFF” time.