Operator`s manual

WRO 300
P/N 3027435 Rev. C
Introduction
13
1.6.2 Description of indications
1.6.3 Definition of Flash Indications
Used to scroll and view data in the display.
Press any of the arrow buttons to unlock the display and enter the alarm
list.
Pressing both arrow buttons simultaneously will lock current information
in the display. Press any arrow buttons to release the locking function.
Indications Description
Green General
Indicates that the WRO 300 is energized.
Green Steady light
RUN mode, auto flush or manual flush in progress.
Slow flash
The auto flush function is activated (only in
standby mode).
Fast flash
Insufficient feed water supply (only in RUN mode).
Yellow Steady light
Chemical disinfection or cleaning is in progress.
Medium flash
The disinfection wand connector is inserted into
the chemical intake.
During selection of procedure in SELECT or
CHEM SELECT.
The chemical intake phase is paused.
Forced rinse is required (
404 RINSE
REQUIRED
).
Red Medium flash
Unconfirmed notification, info, alarm or stop condi-
tions are present.
Steady light
Notification, info, alarm or stop condition has been
confirmed.
Flash indication Time
On Off
Slow flash 0.4 sec 2.0 sec
Medium flash 0.4 sec 0.4 sec
Fast flash 0.2 sec 0.2 sec
Buttons Description