Operator`s manual

P/N 3027435 Rev. C

Introduction

WRO 300

1.6.4 Reminders

Reoccurring notifications can be preset to remind the user to take cer-

tain actions, for example exchange cartridge in the pre-filter. When the

reminder time expires the notification message will be displayed. Fur-

ther information of setting the Reminders, refer to the Service Manual.

1.6.5 Operational data

If any alarm (stop, alarm, info or notification) has been issued, the

alarm list will appear first and can be scrolled and viewed by using the

or . Refer to the Troubleshooting on page 37.

By using or the operational data can be scrolled and viewed in

the display.

Main view will reappear automatically after 15 seconds. It is also possi-

ble to return to the main view, by using either or to scroll

through the alarm list and the operational data until the main view is

displayed.

NOTE

After the reminder time has expired the notification message will only

appear once!

Operational data Unit

PRODUCT WATER X µS/cm

FEED WATER X µS/cm

REJECTION RATE X%

PRODUCT WATER FLOW

1. A flow meter kit has to be installed

X ml/min

PRODUCT WATER TEMP X °C

CHEM,

DAYS SINCE

LAST

2. Visible depending on settings

ACID CLEAN, X

ALKALINE CLEAN, X

PROGRAM VERSION X.y

TOTAL RUN TIME X hr

DATE yyyy-mm-dd

TIME hh:mm:ss

INTERNAL SERVICE Not applicable