Operator`s manual

WRO 300
P/N 3027435 Rev. C
Technical Data
27
4 Technical Data
4.1 Performance and Specification
Values
Product water
Output flow Min. 1.1 l/min
• at +10 °C feed water temperature
• at 0.15 MPa (22 psi) pressure in the prod-
uct water loop
Product water loop Maximum 20 meters (2 x 10 m)
Product water pres-
sure
0.12 to 0.6 MPa (17 to 87 PSI) during
RUN mode (depending of the consump-
tion from product water loop)
Quality Depends on feed water quality. If potable
water is used, the following rejection
rates will be obtained:
Total dissolved salts: >96%
(based on conductivity); at +10 °C feed
water temperature
Bacteria and endotoxins: >99%