Operator`s manual

WRO 300 H
P/N 3027436 Rev. C
Technical Data
29
4 Technical Data
4.1 Performance and Specification
Values
Product water
Output flow Minimum. 1.1 l/min
• at +10 °C feed water temperature
• at 0.15 MPa (22 psi) pressure in
the product water loop
Product water loop Maximum 2 metres (2 x 1 m) uninsu-
lated
Maximum 20 metres (2 x 10 m) insu-
lated*
*under the following conditions;
• MCP recommended insulation shall be used
• the minimum feed water temperature is +10 °C
• the minimum ambient temperature is +18 °C
Product water pressure 0.12 to 0.6 MPa (17 to 87 PSI) during
RUN mode (depending of the con-
sumption from product water loop)
Quality Dependent on feed water quality. If
potable water is used, the following
rejection rates will be obtained:
• Total dissolved salts: >96% (based
on conductivity); at +10 °C feed
water temperature
• Bacteria and endotoxins: >99%