Operator`s manual

P/N 3027436 Rev. C

Technical Data

WRO 300 H

4.4 Materials Contacting Product Water

4.5 Environmental Data

Type Material

Polymers

PA (Polyamide)

PEEK (Polyetheretherketone)

PEI (Polyetherimide)

PE (Polyethylene)

PFA (Fluorocarbon)

POM (Polyoxymethylene)

PP (Polypropylene)

PPS (Polyphenylensulphite)

PVC (Polyvinylchloride)

PVDF (Polyvinyliden fluorid)

Rubber

Q (Silicone)

Metals

Titanium

Stainless steel

Others

Ceramic

Value

Operation

Ambient Temperature range +10 to +40 °C

Relative Humidity range 30 to 85% RH

Air Pressure range 700 to 1060 hPa

Transportation

and storage

Ambient Temperature range -10 to +40 °C

Relative Humidity range 10 to 95% RH

Air Pressure range 500 to 1060 hPa

For transportation and storage below the freezing point, the

WRO 300 H must be filled with a preservation solution of 2%

MEMSTOR, at least 9% glycerol and the remaining parts RO

water.

During transportation and storage the equipment must be kept

in its original packing. If transportation or storage time is more

than 15 weeks, the environmental data relating to the operation

must be followed.

If condensation occurs when moving the equipment between

locations with different temperatures and high relative humidity

(for example. outdoor and indoor locations), the inside of the

equipment must be allowed to dry before switching on the

equipment.