Instructions / Assembly

29
23. ACCESSORIES
23-1. LED EL 200
Accessories are available from your dealer. If you have difficulty locating available accessories, please contact us directly
at 1-888-622-2489 or visit our website at www.marantec.com.
Fig. 61
Mini & Micro Transmitters
(Battery and visor clip included)
MINI Transmitter
Mounting Plate
Photo Eye Safety System
5“
5“
5.5”
6“
6“
5“
5.5”
6“
P/N: 86141
Wire Holder Kit
Extension Bracket Kit
P/N: 85678
LED Cluster
M3-2312 M3-2314 M3-3313 ML-920
M3-543
Wall Control Panel
M8-705
Detachable Power Cord
P/N: 105475
M13-631
Wireless Keyless
Entery System
Fig. 61
Fig. 62
P/N: 101160
Fig. 63
Danger of electric shock:
Before any wiring work begin, make sure that the
operator and all wiring is disconnected from the power
supply. During wiring make sure all wires remain discon-
nected from the power supply at all times.
Assemble LED Cluster (Fig. 61):
 Snap LED board into cluster holder.
 Attach cable to LED board.
LED Cluster Installation:
 Disconnect power cord from operator (Fig. 62).
 Remove lens cover.
 Disconnect LED cluster from operator’s housing.
 Attach new cluster to existing cluster (Fig. 63).
 Snap clusters in operator’s housing.
 Replace lens cover.
 Connect power cord to operator.