Instructions / Assembly

17
10. CONNECT TO POWER
To prevent electrocution or fire, installation and wiring
must be done in accordance with local electrical and
building codes. DO NOT use an extension cord. DO NOT
use a 3 to 2 plug adapter. DO NOT modify or cut off the
grounding pin on the plug.
To reduce the risk of electric shock, your opener is provided with
an insulated power cord with a 3-prong grounding plug. The cord
must be connected to a standard grounding outlet. If there is no
outlet available at the location, you must have a qualified
electrician install an approved grounded outlet in this area.
 Plug the operator into a properly grounded outlet (Fig. 40).
 The display will illuminate the word “On” and will be
displayed. This indicates that the operator is ready for set up.
See fig. 38A for additional display icons.
 DO NOT operate or run the opener at this time.
IMPORTANT:
Contact Marantec America for
Replacement Power Cord
Part #105475
Model: YP-12/YC-12
Overall length 6ft.
UL/CSA Recognized
UL Type: E241374: SJT 3/C 18AWG 105 C 300V VW-1
CSA 177323: SJT 3/C 18AWG 105 C 300V FT2
Fig. 40