Instructions / Assembly

29
23. ACCESSORIES
23-1. LED EL 300
Accessories are available from your dealer. If you have difficulty locating available accessories, please contact us directly
at 1-888-622-2489 or visit our website at www.marantec.com.
Fig. 61
Mini & Micro Transmitters
(Battery and visor clip included)
MINI Transmitter
Mounting Plate
Photo Eye Safety System
5“
5“
5.5”
6“
6“
5“
5.5”
6“
P/N: 86141
Wire Holder Kit
Extension Bracket Kit
P/N: 85678
LED Strips
M3-2312 M3-2314 M3-3313 ML-920
M3-543
Wall Control Panel
M8-705
Detachable Power Cord
P/N: 105475
M13-631
Wireless Keyless
Entery System
Fig. 61
Fig. 62
P/N: 101161
Fig. 63
Danger of electric shock:
Before any wiring work begin, make sure that the
operator and all wiring is disconnected from the power
supply. During wiring make sure all wires remain discon-
nected from the power supply at all times.
Assemble LED Strips (Fig. 61):
 Attach cables to LED strips.
LED Strips Installation:
 Disconnect power cord from operator (Fig. 62).
 Remove lens covers.
 Attach first LED strip to existing strip and snap
into holders (Fig. 63).
 Attach second LED strip to existing strip and snap
into holders (Fig. 63).
 Replace lens cover.
 Connect power cord to operator.