Instructions / Assembly

6
6. OPERATOR PACKAGE CONTENTS (cont’d)
The following items are included with your Garage Door Operator (GDO). All hardware components are located in the GDO
carton. The accessories are packaged with their respective hardware in separate packs for ease of identification and use.
Fig. 7
Items shown not actual size.
Fig. 8
Transmitter (2)
Visor Clip (2)
Cover (2)
Programming
Connector
Modular
Receiver
Garage Door Operator Manual and
Safety Labels
ACCESSORIES
Wall Control Panel
(with Hardware Kit)
Drywall Anchors (2)
Staples (10)
(2)
30 Ft. (9.2m)
2-Conductor Wire
Tapered-Head Screws
Screw Caps (2)
Machine screws
(2)
Warranty
Card
Photo Eye Sensor Safety System
(with accessories)
5“
5“
5.5”
6“
6“
5“
5.5”
6“
Sensor Lens Cap Protectors (2)
Wire Holder Kit
Lag Screw (2): 5/16” x 1-3/4”
Clevis Pin (1): 5/16” x 7/8”
Cotter Ring (1)
Carriage Bolt (2): 1/4” - 20 x 2”
Lock Washer (2): 1/4”
Hex Nut (2): 1/4” - 20
Hex Bolt (2): 5/16” - 18 x 3/4”
Lock Nut (2): 5/16” - 18
Hex Head Tek Screw (2): 1/4 x 3/4”
Hardware Kit
Lag Screw (4): 1/4” x 1-1/2”
Door Bracket
#8030743
Rail Bracket (2)
#99082
Screw (4): M5x8.5mm
Curved Door Arm
#8009466
Screw (2): 3.9x32mm
6 Ft. (1.8m) Detachable Power Cord
Bumper
#102723
Cap (2) #104740
IMPORTANT NOTE
In the unlikely event that hardware is missing from your operator kit.
Please DO NOT RETURN THE OPERATOR KIT TO HOME DEPOT. Please call Marantec
America customer service department at 1-888-662-2489. Your missing hardware/parts
will be sent to you immediately free of charge.
Synergy 370
Synergy 380
6 Ft. (1.8m) Detachable Power Cord
OPERATORS
Terminal
Block
Support Bracket (2)
#71865