PMD-602A User Guide Guía del usuario Guide d’utilisation Guida per l’uso Benutzerhandbuch Appendix English (2–5) Español (6–9) Français (10–13) Italiano (14–17) Deutsch (18–21) English (22)
User Guide (English) Introduction Box Contents PMD-602A User Guide Safety & Warranty Manual Support For the latest information about this product (documentation, technical specifications, system requirements, compatibility information, etc.) and product registration, visit marantzpro.com. For additional product support, visit marantzpro.com/support.
Features Front Panel 2 1 3 6 4 8 5 1. 9 7 10 13 11 12 Limiter: Adjust these switches to turn the limiters On and Off. When the limiter is on, the mic/line input gain will be automatically adjusted according to the set input level so that distortion does not occur. Note: If the input level is set too high, distortion may occur even when the limiter is on. If this is the case, lower the input level or decrease the distance from the microphone and the sound source. 5 2.
5 7 12 Rear Panel 1. XLR-1/4” TRS input: Connect a microphone or line-level device to the XLR-1/4” (6.35 mm) input. 2. XLR-1/4” TRS input: Connect a microphone or line-level device to the XLR-1/4” (6.35 mm) input. Note: Ensure that phantom power is turned off before connecting a line-level device to the XLR-1/4” inputs. If you connect a linelevel device while phantom power is being supplied, this can damage the device or this unit.
Setup Items not listed under Introduction > Box Contents are sold separately. Camera mic input Camera audio output MONITOR IN Microphone LEFT RIGHT OUT Tripod Headphones Operation 1. 2. 3. 4. 5. 6. 7. 8. Attach your DSLR camera securely on top of the hot shoe mount. Attach the Threaded Insert on PMD-602A onto your tripod mount. Place the tripod on a level surface.
