User's Manual

Rear Panel

1. XLR-1/4” TRS input: Connect a microphone

or line-level device to the XLR-1/4” (6.35 mm)

input.

2. XLR-1/4” TRS input: Connect a microphone

or line-level device to the XLR-1/4” (6.35 mm)

input.

Note: Ensure that phantom power is turned

off before connecting a line-level device to

the XLR-1/4” inputs. If you connect a line-

level device while phantom power is being

supplied, this can damage the device or this

unit.

Note: When using a condenser microphone,

before connecting to and disconnecting from

the XLR-1/4” inputs, ensure that phantom

power is turned off. If you connect or

disconnect a microphone while phantom

power is being supplied, this can damage the

unit or the microphone.

Note: Do not connect a dynamic microphone to an XLR-1/4” input when phantom power is

turned on. Doing so could damage the microphone or this unit.

3. 1/8” Input: Connect the audio output of a DSLR camera to this 1/8” (3.5 mm) TRS input.

4. 1/8” Output:

Connect this

1/8” (3.5 mm) TRS

output to the audio input of a DSLR

camera.

5. Hot Shoe Mount: Attach a DSLR camera on top of this hotshoe mount.

6. Threaded Insert: Connect your mounting adapter from a tripod, digital recorder, or lighting

panel here.

MONITOR IN

OUT

LEFT RIGHT